Exchanges

Exchanges in AMQP 0.9.1 — Overview

What are AMQP exchanges?

An exchange accepts messages from a producer application and routes them to message queues. They can be thought of as the “mailboxes” of the AMQP world. Unlike some other messaging middleware products and protocols, in AMQP, messages are not published directly to queues. Messages are published to exchanges that route them to queue(s) using pre-arranged criteria called bindings.

There are multiple exchange types in the AMQP 0.9.1 specification, each with its own routing semantics. Custom exchange types can be created to deal with sophisticated routing scenarios (e.g. routing based on geolocation data or edge cases) or just for convenience.

Concept of Bindings

A binding is an association between a queue and an exchange. A queue must be bound to at least one exchange in order to receive messages from publishers. Learn more about bindings in the Bindings Guide.

Exchange attributes

Exchanges have several attributes associated with them:

  • Name
  • Type (direct, fanout, topic, headers or some custom type)
  • Durability
  • Whether the exchange is auto-deleted when no longer used
  • Other metadata (sometimes known as X-arguments)

Exchange types

There are four built-in exchange types in AMQP v0.9.1:

  • Direct
  • Fanout
  • Topic
  • Headers

As stated previously, each exchange type has its own routing semantics and new exchange types can be added by extending brokers with plugins. Custom exchange types begin with “x-“, much like custom HTTP headers, e.g. x-consistent-hash exchange or x-random exchange.

Message attributes

Before we start looking at various exchange types and their routing semantics, we need to introduce message attributes. Every AMQP message has a number of attributes. Some attributes are important and used very often, others are rarely used. AMQP message attributes are metadata and are similar in purpose to HTTP request and response headers.

Every AMQP 0.9.1 message has an attribute called routing key. The routing key is an “address” that the exchange may use to decide how to route the message. This is similar to, but more generic than, a URL in HTTP. Most exchange types use the routing key to implement routing logic, but some ignore it and use other criteria (e.g. message content).

Declaring an exchange

$options = new Humus\Amqp\ConnectionOptions();
$options->setLogin('username');
$options->setPassword('password');

$connection = new Humus\Amqp\Driver\AmqpExtension\Connection($options);
$connection->connect();

$channel = $connection->newChannel();

$exchange = $channel->newExchange();
$exchange->setName('my-exchange');
$exchange->setType('direct');
$exchange->declareExchange();

Using configuration and factory

<?php

return [
    'dependencies' => [
        'factories' => [
            Driver::class => Humus\Amqp\Container\DriverFactory::class,
            'default-amqp-connection' => [Humus\Amqp\Container\ConnectionFactory::class, 'default'],
        ],
    ],
    'humus' => [
        'amqp' => [
            'driver' => 'php-amqplib',
            'connection' => [
                'default' => [
                    'type' => 'socket',
                    'host' => 'localhost',
                    'port' => 5672,
                    'login' => 'guest',
                    'password' => 'guest',
                    'vhost' => '/',
                    'persistent' => false,
                    'read_timeout' => 3, //sec, float allowed
                    'write_timeout' => 1, //sec, float allowed
                ],
            ],
            'exchange' => [
                'my-exchange' => [
                    'name' => 'my-exchange',
                    'type' => 'direct',
                    'connection' => 'default-amqp-connection',
                    'auto_setup_fabric' => true,
                ],
            ]
        ]
    ]
);

When auto_setup_fabric is set to true, the exchange factory will automatically declare the configured exchanged. For durable exchanges and queues it’s recommended for production to disable it, and declare all needed exchanges and queues upfront.

Fanout exchanges

How fanout exchanges route messages

A fanout exchange routes messages to all of the queues that are bound to it and the routing key is ignored. If N queues are bound to a fanout exchange, when a new message is published to that exchange a copy of the message is delivered to all N queues. Fanout exchanges are ideal for the broadcast routing of messages.

Graphically this can be represented as:

fanout exchange routing

fanout exchange routing

Fanout use cases

Because a fanout exchange delivers a copy of a message to every queue bound to it, its use cases are quite similar:

  • Massively multiplayer online (MMO) games can use it for leaderboard updates or other global events
  • Sport news sites can use fanout exchanges for distributing score updates to mobile clients in near real-time
  • Distributed systems can broadcast various state and configuration updates
  • Group chats can distribute messages between participants using a fanout exchange (although AMQP does not have a built-in concept of presence, so XMPP may be a better choice)

Pre-declared fanout exchanges

AMQP 0.9.1 brokers must implement a fanout exchange type and pre-declare one instance with the name of "amq.fanout".

Applications can rely on that exchange always being available to them. Each vhost has a separate instance of that exchange, it is not shared across vhosts for obvious reasons.

Direct exchanges

How direct exchanges route messages

A direct exchange delivers messages to queues based on a message routing key, an attribute that every AMQP v0.9.1 message contains.

Here is how it works:

  • A queue binds to the exchange with a routing key K
  • When a new message with routing key R arrives at the direct exchange, the exchange routes it to the queue if K = R

A direct exchange is ideal for the unicast routing of messages (although they can be used for multicast routing as well).

Here is a graphical representation:

direct exchange routing

direct exchange routing

Direct routing example

Since direct exchanges use the message routing key for routing, message producers need to specify it:

The routing key will then be compared for equality with routing keys on bindings, and consumers that subscribed with the same routing key each get a copy of the message.

Direct Exchanges and Load Balancing of Messages

Direct exchanges are often used to distribute tasks between multiple workers (instances of the same application) in a round robin manner. When doing so, it is important to understand that, in AMQP 0.9.1, messages are load balanced between consumers and not between queues.

The Queues and Consumers guide provides more information on this subject.

Pre-declared direct exchanges

AMQP 0.9.1 brokers must implement a direct exchange type and pre-declare two instances:

  • amq.direct
  • “” exchange known as default exchange (unnamed, referred to as an empty string)

Applications can rely on those exchanges always being available to them. Each vhost has separate instances of those exchanges, they are not shared across vhosts for obvious reasons.

Default exchange

The default exchange is a direct exchange with no name pre-declared by the broker. It has one special property that makes it very useful for simple applications, namely that every queue is automatically bound to it with a routing key which is the same as the queue name.

For example, when you declare a queue with the name of “search.indexing.online”, RabbitMQ will bind it to the default exchange using “search.indexing.online” as the routing key. Therefore a message published to the default exchange with routing key = “search.indexing.online” will be routed to the queue “search.indexing.online”. In other words, the default exchange makes it seem like it is possible to deliver messages directly to queues, even though that is not technically what is happening.

Direct Exchange Use Cases

Direct exchanges can be used in a wide variety of cases:

  • Direct (near real-time) messages to individual players in an MMO game
  • Delivering notifications to specific geographic locations (for example, points of sale)
  • Distributing tasks between multiple instances of the same application all having the same function, for example, image processors
  • Passing data between workflow steps, each having an identifier (also consider using headers exchange)
  • Delivering notifications to individual software services in the network

Topic Exchanges

How Topic Exchanges Route Messages

Topic exchanges route messages to one or many queues based on matching between a message routing key and the pattern that was used to bind a queue to an exchange. The topic exchange type is often used to implement various publish/subscribe pattern variations.

Topic exchanges are commonly used for the multicast routing of messages.

Topic exchanges can be used for broadcast routing, but fanout exchanges are usually more efficient for this use case.

Topic Exchange Routing Example

Two classic examples of topic-based routing are stock price updates and location-specific data (for instance, weather broadcasts). Consumers indicate which topics they are interested in (think of it like subscribing to a feed for an individual tag of your favourite blog as opposed to the full feed).

A routing pattern consists of several words separated by dots, in a similar way to URI path segments being joined by slash. A few of examples:

  • asia.southeast.thailand.bangkok
  • sports.basketball
  • usa.nasdaq.aapl
  • tasks.search.indexing.accounts

The following routing keys match the “americas.south.#” pattern:

  • americas.south
  • americas.south.brazil
  • americas.south.brazil.saopaolo
  • americas.south.chile.santiago

In other words, the “#” part of the pattern matches 0 or more words.

For the pattern “americas.south.*”, some matching routing keys are:

  • americas.south.brazil
  • americas.south.chile
  • americas.south.peru

but not

  • americas.south
  • americas.south.chile.santiago

As you can see, the “*” part of the pattern matches 1 word only.

Topic Exchange Use Cases

Topic exchanges have a very broad set of use cases. Whenever a problem involves multiple consumers/applications that selectively choose which type of messages they want to receive, the use of topic exchanges should be considered. To name a few examples:

  • Distributing data relevant to specific geographic location, for example, points of sale
  • Background task processing done by multiple workers, each capable of handling specific set of tasks
  • Stocks price updates (and updates on other kinds of financial data)
  • News updates that involve categorization or tagging (for example, only for a particular sport or team)
  • Orchestration of services of different kinds in the cloud
  • Distributed architecture/OS-specific software builds or packaging where each builder can handle only one architecture or OS

Publishing messages

<?php

$exchange->publish(
    'some message',
    'routing_key',
    Constants::AMQP_NOPARAM,
    [
        'arguments' => [
            'arg1' => 'value'
        ],
    ]
);

Data serialization

You are encouraged to take care of data serialization before publishing (i.e. by using JSON, Thrift, Protocol Buffers or some other serialization library). Note that because AMQP is a binary protocol, text formats like JSON largely lose their advantage of being easy to inspect as data travels across the network, so if bandwidth efficiency is important, consider using MessagePack or Protocol Buffers.

A few popular options for data serialization are:

Message attributes

RabbitMQ messages have various metadata attributes that can be set when a message is published. Some of the attributes are well-known and mentioned in the AMQP 0.9.1 specification, others are specific to a particular application. Well-known attributes are listed here as options that HumusAmqp takes:

  • :persistent
  • :delivery_mode
  • :mandatory
  • :timestamp
  • :expiration
  • :type
  • :reply_to
  • :content_type
  • :content_encoding
  • :correlation_id
  • :priority
  • :cluster_id
  • :user_id
  • :app_id
  • :message_id

All other attributes can be added to a headers table.

An example:

<?php

$exchange->publish(
    '{"foo": "bar"}',
    'routing_key',
    Constants::AMQP_NOPARAM,
    [
        'app_id' => 'amqp.example',
        'type' => 'kinda.checkin',
        'headers' => [
            'latitude' => 59.35,
            'longituide' => 18.0666667
        ],
        'timestamp' => time(),
        'correlation_id' => 'r-1',
        'content_type' => 'application/json',
        'delivery_mode' => 2,
        'content_encoding' => 'UTF-8',
    ]
);

:routing_key

Used for routing messages depending on the exchange type and configuration.

:persistent

When set to true, RabbitMQ will persist message to disk.

:mandatory

This flag tells the server how to react if the message cannot be routed to a queue. If this flag is set to true, the server will return an unroutable message to the producer with a basic.return AMQP method. If this flag is set to false, the server silently drops the message.

:content_type

MIME content type of message payload. Has the same purpose/semantics as HTTP Content-Type header.

:content_encoding

MIME content encoding of message payload. Has the same purpose/semantics as HTTP Content-Encoding header.

:priority

Message priority, from 0 to 9.

:message_id

Message identifier as a string. If applications need to identify messages, it is recommended that they use this attribute instead of putting it into the message payload.

:reply_to

Commonly used to name a reply queue (or any other identifier that helps a consumer application to direct its response). Applications are encouraged to use this attribute instead of putting this information into the message payload.

:correlation_id

ID of the message that this message is a reply to. Applications are encouraged to use this attribute instead of putting this information into the message payload.

:type

Message type as a string. Recommended to be used by applications instead of including this information into the message payload.

:user_id

Sender’s identifier. Note that RabbitMQ will check that the value of this attribute is the same as username AMQP connection was authenticated with, it SHOULD NOT be used to transfer, for example, other application user ids or be used as a basis for some kind of Single Sign-On solution.

:app_id

Application identifier string, for example, “eventoverse” or “webcrawler”

:timestamp

Timestamp of the moment when message was sent, in seconds since the Epoch

:expiration

Message expiration specification as a string

:arguments

A map of any additional attributes that the application needs. Nested hashes are supported. Keys must be strings.

It is recommended that application authors use well-known message attributes when applicable instead of relying on custom headers or placing information in the message body. For example, if your application messages have priority, publishing timestamp, type and content type, you should use the respective AMQP message attributes instead of reinventing the wheel.

Validated User ID

In some scenarios it is useful for consumers to be able to know the identity of the user who published a message. RabbitMQ implements a feature known as validated User ID. If this property is set by a publisher, its value must be the same as the name of the user used to open the connection. If the user-id property is not set, the publisher’s identity is not validated and remains private.

Publishing Callbacks and Reliable Delivery in Distributed Environments

A commonly asked question about RabbitMQ clients is “how to execute a piece of code after a message is received”.

Message publishing with HumusAmqp happens in several steps:

  • AMQPExchange::publish takes a payload and various metadata attributes
  • Resulting payload is staged for writing
  • On the next event loop tick, data is transferred to the OS kernel using one of the underlying NIO APIs
  • OS kernel buffers data before sending it
  • Network driver may also employ buffering

As you can see, “when data is sent” is a complicated issue and while methods to flush buffers exist, flushing buffers does not guarantee that the data was received by the broker because it might have crashed while data was travelling down the wire.

The only way to reliably know whether data was received by the broker or a peer application is to use message acknowledgements. This is how TCP works and this approach is proven to work at the enormous scale of the modern Internet. AMQP 0.9.1 fully embraces this fact and HumusAmqp follows.

In cases when you cannot afford to lose a single message, AMQP 0.9.1 applications can use one (or a combination of) the following protocol features:

  • Publisher confirms (a RabbitMQ-specific extension to AMQP 0.9.1)
  • Publishing messages as mandatory
  • Transactions (these introduce noticeable overhead and have a relatively narrow set of use cases)

A more detailed overview of the pros and cons of each option can be found in a blog post that introduces Publisher Confirms extension by the RabbitMQ team. The next sections of this guide will describe how the features above can be used with HumusAmqp.

Publishing messages as mandatory

When publishing messages, it is possible to use the :mandatory option to publish a message as “mandatory”. When a mandatory message cannot be routed to any queue (for example, there are no bindings or none of the bindings match), the message is returned to the producer.

<?php

$connection = new \Humus\Amqp\Driver\AmqpExtension\Connection();
$connection->connect();

$channel = $connection->newChannel();

$exchange = $channel->newExchange();
$exchange->setName('my-exchange');

$exchange->publish(
    '{"foo": "bar"}',
    'routing_key',
    Constants::AMQP_MANDATORY
);

$this->channel->setReturnCallback(
    function (
        int $replyCode,
        string $replyText,
        string $exchange,
        string $routingKey,
        Envelope $envelope,
        string $body
    ) use (&$result) {
        $result[] = 'Message returned';
        $result[] = func_get_args();
        return false;
    }
);

try {
    $this->channel->waitForBasicReturn();
} catch (\Exception $e) {
    //$result[] = get_class($e) . ': ' . $e->getMessage(); //@todo: make php amqplib throw these exceptions
}

var_dump($result);

Returned messages

When a message is returned, the application that produced it can handle that message in different ways:

  • Store it for later redelivery in a persistent store
  • Publish it to a different destination
  • Log the event and discard the message

A returned message handler has access to AMQP method (basic.return) information, message metadata and payload (as a byte array). The metadata and message body are returned without modifications so that the application can store the message for later redelivery.

Publishing Persistent Messages

Messages potentially spend some time in the queues to which they were routed before they are consumed. During this period of time, the broker may crash or experience a restart. To survive it, messages must be persisted to disk. This has a negative effect on performance, especially with network attached storage like NAS devices and Amazon EBS. AMQP 0.9.1 lets applications trade off performance for durability, or vice versa, on a message-by-message basis.

To publish a persistent message, use the :persistent option:

Note that in order to survive a broker crash, the messages MUST be persistent and the queue that they were routed to MUST be durable.

Durability and Message Persistence provides more information on the subject.

Publishing In Multi-threaded Environments

When using HumusAmqp in multi-threaded environments, the rule of thumb is: avoid sharing channels across threads.

In other words, publishers in your application that publish from separate threads should use their own channels. The same is a good idea for consumers.

Headers exchanges

Now that message attributes and publishing have been introduced, it is time to take a look at one more core exchange type in AMQP 0.9.1. It is called the headers exchange type and is quite powerful.

How headers exchanges route messages

An Example Problem Definition

The best way to explain headers-based routing is with an example. Imagine a distributed continuous integration system that distributes builds across multiple machines with different hardware architectures (x86, IA-64, AMD64, ARM family and so on) and operating systems. It strives to provide a way for a community to contribute machines to run tests on and a nice build matrix like the one WebKit uses. One key problem such systems face is build distribution. It would be nice if a messaging broker could figure out which machine has which OS, architecture or combination of the two and route build request messages accordingly.

A headers exchange is designed to help in situations like this by routing on multiple attributes that are more easily expressed as message metadata attributes (headers) rather than a routing key string.

Routing on Multiple Message Attributes

Headers exchanges route messages based on message header matching. Headers exchanges ignore the routing key attribute. Instead, the attributes used for routing are taken from the “headers” attribute. When a queue is bound to a headers exchange, the :arguments attribute is used to define matching rules:

<?php

return [
    'dependencies' => [
        'factories' => [
            Driver::class => Humus\Amqp\Container\DriverFactory::class,
            'default-amqp-connection' => [Humus\Amqp\Container\ConnectionFactory::class, 'default'],
        ],
    ],
    'humus' => [
        'amqp' => [
            'driver' => 'php-amqplib',
            'connection' => [
                'default' => [
                    'type' => 'socket',
                    'host' => 'localhost',
                    'port' => 5672,
                    'login' => 'guest',
                    'password' => 'guest',
                    'vhost' => '/',
                    'persistent' => false,
                    'read_timeout' => 3, //sec, float allowed
                    'write_timeout' => 1, //sec, float allowed
                ],
            ],
            'exchange' => [
                'header-exchange' => [
                    'name' => 'header-exchange',
                    'type' => 'headers',
                    'connection' => 'default-amqp-connection',
                ],
            ],
            'queue' => [
                'myqueue-1' => [
                    'name' => 'myqueue',
                    'exchanges' => [
                        'header-exchange' => [
                            [
                                'arguments' => [
                                    'os' => 'linux',
                                    'x-match' => 'all'
                                ],
                            ]
                        ],
                    ],
                    'connection' => 'default-amqp-connection',
                ],
                'myqueue-2' => [
                    'name' => 'myqueue',
                    'exchanges' => [
                        'header-exchange' => [
                            [
                                'arguments' => [
                                    'os' => 'osx',
                                    'x-match' => 'any'
                                ],
                            ]
                        ]
                    ],
                    'connection' => 'default-amqp-connection',
                ],
            ],
        ],
    ],
];

When matching on one header, a message is considered matching if the value of the header equals the value specified upon binding. An example that demonstrates headers routing:

<?php

$exchange->publish(
    '8 cores/Linux',
    '',
    Constants::AMQP_NOPARAM,
    [
        'headers' => [
            'os' => 'linux',
            'cores' => 8
        ],
    ]
);

$exchange->publish(
    '4 cores/OS X',
    '',
    Constants::AMQP_NOPARAM,
    [
        'headers' => [
            'os' => 'osx',
            'cores' => 4
        ],
    ]
);

When executed, it outputs

myqueue-2 received 8 cores/Linux

The myqueue-1 has not matched, because of x-match: all

Matching All vs Matching One

It is possible to bind a queue to a headers exchange using more than one header for matching. In this case, the broker needs one more piece of information from the application developer, namely, should it consider messages with any of the headers matching, or all of them? This is what the “x-match” binding argument is for.

When the "x-match" argument is set to "any", just one matching header value is sufficient. So in the example above, any message with a “cores” header value equal to 8 will be considered matching.

Headers Exchange Routing

When there is just one queue bound to a headers exchange, messages are routed to it if any or all of the message headers match those specified upon binding. Whether it is “any header” or “all of them” depends on the "x-match" header value. In the case of multiple queues, a headers exchange will deliver a copy of a message to each queue, just like direct exchanges do. Distribution rules between consumers on a particular queue are the same as for a direct exchange.

Headers Exchange Use Cases

Headers exchanges can be looked upon as “direct exchanges on steroids” and because they route based on header values, they can be used as direct exchanges where the routing key does not have to be a string; it could be an integer or a hash (dictionary) for example.

Some specific use cases:

  • Transfer of work between stages in a multi-step workflow (routing slip pattern)
  • Distributed build/continuous integration systems can distribute builds based on multiple parameters (OS, CPU architecture, availability of a particular package).

Pre-declared Headers Exchanges

RabbitMQ implements a headers exchange type and pre-declares one instance with the name of "amq.match". RabbitMQ also pre-declares one instance with the name of "amq.headers". Applications can rely on those exchanges always being available to them. Each vhost has a separate instance of those exchanges and they are not shared across vhosts for obvious reasons.

Custom Exchange Types

consistent-hash

The consistent hashing AMQP exchange type is a custom exchange type developed as a RabbitMQ plugin. It uses consistent hashing to route messages to queues. This helps distribute messages between queues more or less evenly.

A quote from the project README:

In various scenarios, you may wish to ensure that messages sent to an exchange are consistently and equally distributed across a number of different queues based on the routing key of the message. You could arrange for this to occur yourself by using a direct or topic exchange, binding queues to that exchange and then publishing messages to that exchange that match the various binding keys.

However, arranging things this way can be problematic:

It is difficult to ensure that all queues bound to the exchange will receive a (roughly) equal number of messages without baking in to the publishers quite a lot of knowledge about the number of queues and their bindings.

If the number of queues changes, it is not easy to ensure that the new topology still distributes messages between the different queues evenly.

Consistent Hashing is a hashing technique whereby each bucket appears at multiple points throughout the hash space, and the bucket selected is the nearest higher (or lower, it doesn’t matter, provided it’s consistent) bucket to the computed hash (and the hash space wraps around). The effect of this is that when a new bucket is added or an existing bucket removed, only a very few hashes change which bucket they are routed to.

In the case of Consistent Hashing as an exchange type, the hash is calculated from the hash of the routing key of each message received. Thus messages that have the same routing key will have the same hash computed, and thus will be routed to the same queue, assuming no bindings have changed.

x-random

The x-random AMQP exchange type is a custom exchange type developed as a RabbitMQ plugin by Jon Brisbin. A quote from the project README:

It is basically a direct exchange, with the exception that, instead of each consumer bound to that exchange with the same routing key getting a copy of the message, the exchange type randomly selects a queue to route to.

This plugin is licensed under Mozilla Public License 1.1, same as RabbitMQ.

Using the Publisher Confirms Extension

Please refer to RabbitMQ Extensions guide

Message Acknowledgements and Their Relationship to Transactions and Publisher Confirms

Consumer applications (applications that receive and process messages) may occasionally fail to process individual messages, or might just crash. Additionally, network issues might be experienced. This raises a question - “when should the RabbitMQ remove messages from queues?” This topic is covered in depth in the Queues guide, including prefetching and examples.

In this guide, we will only mention how message acknowledgements are related to AMQP transactions and the Publisher Confirms extension. Let us consider a publisher application (P) that communications with a consumer (C) using AMQP 0.9.1. Their communication can be graphically represented like this:

-----       -----       -----
|   |   S1  |   |   S2  |   |
| P | ====> | B | ====> | C |
|   |       |   |       |   |
-----       -----       -----

We have two network segments, S1 and S2. Each of them may fail. A publisher (P) is concerned with making sure that messages cross S1, while the broker (B) and consumer (C) are concerned with ensuring that messages cross S2 and are only removed from the queue when they are processed successfully.

Message acknowledgements cover reliable delivery over S2 as well as successful processing. For S1, P has to use transactions (a heavyweight solution) or the more lightweight Publisher Confirms, a RabbitMQ-specific extension.

Binding Queues to Exchanges

Queues are bound to exchanges. This topic is described in detail in the Queues and Consumers guide.

Unbinding Queues from Exchanges

Queues are unbound from exchanges using. This topic is described in detail in the Queues and Consumers guide.

Deleting Exchanges

Explicitly deleting an Exchange

Exchanges are deleted using the Humus\Amqp\Exchange#delete:

<?php

$exchange->delete();

Auto-delete exchanges via configuration

Exchanges can be auto-deleted. To declare an exchange as auto-deleted, use the :auto_delete option on declaration:

<?php

return [
    'humus' => [
        'amqp' => [
            'exchange' => [
                'header-exchange' => [
                    'name' => 'header-exchange',
                    'type' => 'headers',
                    'auto_delete' => true
                ],
            ],
        ],
    ],
];

An auto-deleted exchange is removed when the last queue bound to it is unbound.

Exchange durability vs Message durability

See Durability guide

Wrapping Up

Publishers publish messages to exchanges. Messages are then routed to queues according to rules called bindings that applications define. There are 4 built-in exchange types in RabbitMQ and it is possible to create custom types.

Messages have a set of standard properties (e.g. type, content type) and can carry an arbitrary map of headers.

Tell Us What You Think!

Please take a moment to tell us what you think about this guide: Send an e-mail, say hello in the HumusAmqp gitter chat. or raise an issue on Github.

Let us know what was unclear or what has not been covered. Maybe you do not like the guide style or grammar or discover spelling mistakes. Reader feedback is key to making the documentation better.